.png)
Jindal MLC Pro Pipes handle higher temperatures where standard multilayer pipes reach their limit. Built with PE-RT inner and outer layers bonded to aluminium, they deliver sustained performance up to 95°C. The result is reliable hot water flow, fewer fittings, and leak-proof joints. Tested to Indian & international standards, these pipes deliver 50 years of consistent, maintenance-free service.
PE-AL-PE / PERT-AL-PERT
Inner and Outer layers of HDPE (High Density Polyethylene) and Middle layer of Aluminium.
- SIZEIDODCOIL16mm12mm16mm200mtr20mm16mm20mm200mtr25mm20mm25mm100mtr32mm25mm32mm100mtr40mm32mm40mm100mtr50mm40mm50mm50mtr63mm50mm63mm6mtr75mm63mm75mm6mtr
Hot & Cold Water supply
Hot & Cold Water, Drinking Water, Solar Water, HVAC systems, Underfloor Heating & Cooling
Pressure Rating
13.8 bar at 23°C
11.0 bar at 60°C
6.9 bar at 82°C
Temperature Rating
-20°C to 82°C
Certification
IS : 15450 (2022)
ISO 21003
ASTM F 1282
Pressure Rating
13.8 bar at 23°C
11.0 bar at 60°C
6.9 bar at 82°C
Temperature Rating
-20°C to 82°C
Certification
IS : 15450 (2022)
ISO 21003
ASTM F 1282
PRODUCT FEATURES
Multi-Layer tech
Combines polymer and aluminum layers for strength, durability, and reliability.
Bendable
Easily bends around corners, reducing fittings and speeding up installation.
Food Grade Materials
Manufactured with food-grade materials for pure, hygienic water supply.
Higher Flow Rates
30% Better flow rate compared to traditional piping systems
50 Years working life
Rust & Corrosion free, engineered to last over five decades.
Learn the proper way to install Jindal Multi Layer Composite Pipes by watching a quick video linked below. When installed correctly there is zero chance of leakages and you will have a piping system that will last you over 50 years.
COMPARISON
JINDAL vs OTHER PIPES
.png)
Corrosion resistance
Never rusts
No rust, but may turn brittle
Scale Build-up
Zero scaling
Minor scaling over time
Weight
Lightweight
Lightweight
Flexibility
Bendable, No elbow needed
Rigid, elbows needed
Pressure Resistance
Upto 15 Bar
10-12 Bar
Thermal Expansion
Very Low
Moderate
Installation Ease
Quick with compression/crimp fittings
Medium, needs solvent cement
Leak Resistance
Leak Proof system with minimal joints
More Joints, vulnerable to leakages
Working life
50+ Years
35-40 Years
Water safety
Food Grade material
Made from toxic chemicals
Overall Cost
5-7% more expensive than CPVC
Slightly cheaper than MLC
Corrosion resistance
Never rusts
Prone to rust and corrosion
Scale Build-up
Zero scaling
High, which reduces flow
Weight
Lightweight
Heavy, difficult to handle
Flexibility
Bendable, No elbow needed
Rigid, elbows needed
Pressure Resistance
Upto 15 Bar
Upto 15 Bar, but joint leakage possible
Thermal Expansion
Very Low
Low, but deforms with age
Installation Ease
Quick with compression/crimp fittings
Difficult, requires threading and welding
Leak Resistance
Leak Proof system with minimal joints
Joint leakage common, especially at threads
Working life
50+ Years
10-15 Years due to corrosion
Water safety
Food Grade material
Can contaminate water with rust
Overall Cost
Similar initial cost, but zero maintenance
Much higher long term cost
Corrosion resistance
Never rusts
Excellent Corrosion resistance
Scale Build-up
Zero scaling
Minimal scaling
Weight
Lightweight
Heavy, difficult to handle
Flexibility
Bendable, No elbow needed
Rigid, elbows needed
Pressure Resistance
Upto 15 Bar
Vert high pressure resistance
Thermal Expansion
Very Low
Very low
Installation Ease
Quick with compression/crimp fittings
Difficult, requires threading and welding
Leak Resistance
Leak Proof system with minimal joints
Reliable joints but welding quality critical
Working life
50+ Years
50+ Years
Water safety
Food Grade material
Hygienic Non Toxic
Overall Cost
Much cheaper
Very High
Corrosion resistance
Never rusts
Corrosion-resistant but can be affected by some chemicals
Scale Build-up
Zero scaling
Minimal scaling
Weight
Lightweight
Lightweight
Flexibility
Bendable, No elbow needed
Rigid, elbows needed
Pressure Resistance
Upto 15 Bar
Upto 10 Bar
Thermal Expansion
Very Low
Medium
Installation Ease
Quick with compression/crimp fittings
Fusion welding required
Leak Resistance
Leak Proof system with minimal joints
Reliable joints but welding quality critical
Working life
50+ Years
25-50 Years
Water safety
Food Grade material
Hygienic Non Toxic
Overall Cost
Cost effective over lifetime
Lower Initial cost
Comparison Factor | JINDAL MLC | CPVC | GI | SS | PPR |
|---|---|---|---|---|---|
Corrossion resistance | Never Rusts | No rust but may turn brittle | Poor, rusts over time | Excellent | Excellent |
Scale build-up | None | Minimal | Heavy over years | Some possible | Minimal |
Weight | Lightweight | Lightweight | Heavy | Heavy | Lightweight |
Flexibility | Bendable, no elbow needed | Rigid, elbow needed | Rigid, elbow needed | Rigid, elbow needed | Rigid, elbow needed |
Pressure resistance | Upto 15 Bar | 10-12 Bar | Upto 15 Bar, but joint leakage possible | Very High | 10-12 Bar |
Thermal expansion | Very Low | Moderate | None | None | High |
Installation | Quick with Compression/Crimp fittings | Moderate (glue required) | Difficult (Threading) | Difficult (Welding) | Difficult (Fusion welding) |
Leak resistance | Leak proof system with minimal joints | More joints, vulnerable to leakages | Joint leakage common | Reliable joints, but welding quality critical | Reliable joints, but welding quality critical |
Working life | 50+ Years | 30-40 years | 10-15 Years | 50+ Years | 25-50 Years |
Water safety | Food Grade material | Made from toxic chemicals | Can contaminate water with rust | Hygienic non toxic | Hygienic non toxic |
Cost (Overall) | Low-Med | Low-Med | Medium | Very High | Low-Med |
Installation Guide
Cut the pipe from a perpendicular angle using the Pipe Cutter
Round and chamfer the pipe using a reamer with 3–5 rotations for proper insertion
Use the Internal/External Bending Springs for bending the pipe to avoid dents
Insert the pipe fully into the fitting until it is correctly seated and ready for pressing
Ensure the pipe is visible through the inspection hole on the SS Sleeve
Select the correct size press jaw, align it with the sleeve, and press until the cycle is complete
When installed correctly there is zero chance of leakages and you will have a piping system that will last you over 50 years.
Learn the proper way to install Jindal Multi Layer Composite Pipes by watching a quick video linked below.
Jindal MLC Pro Pipes handle higher temperatures where standard multilayer pipes reach their limit. Built with PE-RT inner and outer layers bonded to aluminium, they deliver sustained performance up to 95°C. The result is reliable hot water flow, fewer fittings, and leak-proof joints. Tested to Indian & international standards, these pipes deliver 50 years of consistent, maintenance-free service.
PERT-AL-PERT
Multi-layer composite structure with Inner and Outer layers of PERT (Raised Temperature Polyethylene) and Middle layer of Aluminium.
- SIZEIDODCOIL16mm12mm16mm200mtr20mm16mm20mm200mtr25mm20mm25mm100mtr32mm25mm32mm100mtr40mm32mm40mm100mtr50mm40mm50mm50mtr63mm50mm63mm6mtr75mm63mm75mm6mtr
Hot & Cold Water supply
Hot & Cold Water, Drinking Water, Solar Water, HVAC systems, Underfloor Heating & Cooling
Pressure Rating
15.8 bar at 23°C
12.4 bar at 60°C
6.9 bar at 82°C
Temperature Rating
MLC PIPES: -20°C to 82°C
MLC PRO: -20°C to 95°C
Certification
ISO 21003
ASTM F 1282